• Product selection guide

Surface Mounted

Filter
1
Hits: 11
Topseller
Surface-mounted single thermostats - ATH series

Surface-mounted single thermostats
ATH series Basic type: 603021
The devices of the ATH series are available as temperature controllers (TR), temperature limiters (TB), temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB sets the system being monitored to a safe operating status.
  • Material: stainless steel/copper
  • Max. capillary: 5000 mm
  • Max. control range: 20 to 500 °C
Topseller
JUMO heatTHERM-AT and DR - Surface-mounted thermostat

JUMO heatTHERM-AT and DR
Surface-mounted thermostat Basic type: 603070
The JUMO heatTHERM-DR (design type 7+8) type is a specific variation with a special case bottom section for DIN rail or wall mounting. As a result, easy installation on mounting rails TH35 according to DIN EN 60715 (e.g. in control cabinets) is possible.
  • "Push-In®" terminal technology
  • Surface-mounted thermostat or DIN-rail thermostat
  • Max. control range up to 350 °C
JUMO eTRON M100 - Electronic cooling controller

JUMO eTRON M100
Electronic cooling controller Basic type: 701061
The JUMO eTRON M100 is an electronic cooling controller for use in cold-storage rooms, display refrigerators, or refrigerating counters to be connected to RTD temperature probes. The first measurement input acquires the temperature of the cold-storage room. The second measurement input acquires the temperature of the vaporizer.
  • Pt100 two-wire, Pt1000 two-wire, KTY2X-6
  • DIN EN 12830 and DIN EN 13485
  • HACCP-compliant recording
JUMO frostTHERM-AT/-DR - Frost protection thermostat

JUMO frostTHERM-AT/-DR
Frost protection thermostat Basic type: 604100
The product monitors the temperature in ventilation and air-conditioning systems. It has a small switching differential and a high level of reproducibility. The AT version allows mounting on the wall; the DR version is suitable for DIN-rail mounting.
  • Max. probe line length 12000 mm
  • Control range: -10 to +15 °C
  • Protection type (AT) up to IP65
JUMO frostTHERM-ATE - Electronic frost protection thermostat

JUMO frostTHERM-ATE
Electronic frost protection thermostat Basic type: 604170
The frost protection thermostat is used on the air part of air-conditioning systems, heat exchangers, heating registers, and similar units to protect them against frost damage and freezing. Applications include in building automation and the ventilation and air-conditioning industry.
  • Max. probe line length 6000 m
  • Control range: 1 to 10 °C
  • Protection type IP42
Surface-mounted thermostats - AMTHF series

Surface-mounted thermostats
AMTHF series Basic type: 603051
The devices of AMTHF series are available with 2, 3, or 4 switching steps as temperature controllers (TR) and temperature monitors (TW). The sequence contact gap of the individual switching steps in Kelvin is adjusted in a fixed manner according to customer requirements per default.
  • Material: stainless steel/copper
  • Max. capillary: 5000 mm
  • Max. control range: 50 to 300 °C
Surface-mounted thermostats - ATH.-SE series

Surface-mounted thermostats
ATH.-SE series Basic type: 603031
The devices of the ATH.-SE series are available as temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status.
  • Max. control range: 50 to 300 °C
  • Material: stainless steel/copper
  • Max. capillary: 2000 mm
JUMO exTHERM-AT - Explosion-protected surface-mounted thermostat

JUMO exTHERM-AT
Explosion-protected surface-mounted thermostat Basic type: 605055
The product monitors and controls temperature in potentially explosive areas. Use in environments with gas and steam is permitted (zones 1 and 2); use in environments with conductive dust (zones 21 and 22) is also permitted.
  • Max. switching capacity: 25 A
  • Protection type IP66
  • Max. control range: 20 to 500 °C
Surface-mounted single thermostat or surface-mounted double thermostat - ATH-SW series

Surface-mounted single thermostat or surface-mounted double thermostat
ATH-SW series Basic type: 603035
Surface-mounted thermostats of the ATH-SW type series consist of 1 or 2 separate measuring and switching systems. The devices are available as temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB).
  • Material: stainless steel/copper
  • Max. capillary: 5000 mm
  • Max. control range: 20 to 500 °C
Exhaust gas temperature monitor - Type STM-RW-2

Exhaust gas temperature monitor
Type STM-RW-2 Basic type: 601540
The exhaust gas temperature monitor is used to monitor the exhaust gas temperature released from solid fuel boilers when in bivalent operation with oil-fired boilers. Another application is the locking of ventilation systems that cause vacuums in combination with tiled stoves and chimneys.
  • AC 230 V +10 %
  • Protection tube: 15 × 150 mm, steel
  • Limit value range: 40 to 120 °C
Surface-mounted double thermostat - ATH series

Surface-mounted double thermostat
ATH series Basic type: 603026
Surface-mounted double thermostats of the ATH series consist of 2 separate measuring and switching systems. The devices are available as temperature controllers (TR), temperature limiters (TB), temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB).
  • Material: stainless steel/copper
  • Max. capillary: 5000 mm
  • Max. control range: 20 to 500 °C

item items, maximum number of items reached

We are at your service

We are at your service

We'll be happy to help – whether you have a technical concern, need to schedule an appointment, request a quote, or inquire about a price.
Contact us